Skip to main content

Creating a Complex G3, 360 Character Head in Cartoon Animator 4 - Tips and Recommendations

Desert Scavenger G3, 360 Head.
Creating G3, 360 character heads in Reallusion's Cartoon Animator 4 is something of a daunting task if you are working with a more detailed character head design. Your first attempt is bound to be a lot of trial and error. Mine certainly was and, in this article, I'm going to share with you what I learned.

That said, this is not a tutorial. It's a run down of my experience creating a head for my own character. I've linked to Reallusion's video tutorials below.

I chose to use a redesigned version of my G3 Desert Scavenger, Rey, Star Wars, parody character. Since the biggest part of her redesign was a completely new look head I thought now was a good time to try a more complex 360 head than my previous Color Monkey heads.

The process of setting up a 360 head is not hard but there is a lot to take in. To prepare myself I went through Reallusions first eight video tutorials which cover almost every aspect of the 360 head creator (which you'll find in the character composer).

The easiest way to access these tutorials is through the Cartoon Animator's tutorials page on the Reallusion website. Just open the 360 Head Creation section. There are actually four additional videos you can watch (for CA4 Pipeline Users) but the first eight will give you more than enough information to create your first 360 heads.

All my  tips and suggestions are based on creating a human character so may not be relevant to non human characters in part.

Getting Started


The easiest starting point is to create your character's head as a standard, front facing G3 character head - even if your character body is a 'side' or 315 degree angle character. Once your head is complete you'll be able to turn it to match whatever body angle you're using.

If you watch the tutorials you'll see it is possible to create a head that can turn a full 360 degrees however, unless you really need that, limiting your head to a 180 degree (left to right) turn is less work and will give you a good range of movement. You can always extend it to a full 360 degree turn later (or use other tricks to suggest a back view for those moments when you need one).

Top Left - how my head sprites appear when assembled
in Photoshop. Everything else, sprites that I had to create
or modify for the face, hair, and hip/upper body
with extended neck.
A key point to designing your head is to use flat colors rather than gradients. Particularly make sure each color is on its own layer in your graphic editor. For example, on my character you can see there is a light and dark shadow on each side of her face. These shadow elements are each on their own layer and, I didn't actually add them to my head until after I got the eyes, nose, and mouth moving how I wanted on the face.

If you have any elements that may not be seen once the head is turned left or right consider making it a separate sprite. For example my characters front hair on the standard G3 version is all one sprite. On the 360 version I split the sprite into left and right sides.

Another thing you may want to do is give your character a longer neck on the hip/upper body sprite. I found mine was initially too short causing my 360 head to look like it was floating on my side views.


360 Heads are as Complex as You Make Them


Here you can see my character has 11 set
viewpoints. All created by deforming the
front facing sprites. Above shows how I
deformed the front facing face shape to
achieve a side facing face shape.
360 heads can have as many as 25 individual angles each with full sprite replacement so you can get each angle looking exactly how you want. Fortunately it is completely optional to create sprites for all 25 angles, and even optional use all 25 angles.

My character only has actual sprites for one forward facing angle. Every other angle is achieved by transforming, deforming, masking, and moving my initial forward facing sprites. For the most part I feel my character's head looks pretty good at each of the eleven angles I created for her. Cartoon Animator does the rest in terms of managing the transformation between set poses.

I would recommend this approach. Try to create as much of your head turn as you can with your forward facing sprites. Only add in a new sprite if you're not able to achieve the results you want (or you just want the highest quality face turn achievable).

Work on getting the elements you have moving with the head as it turns so that they look like they are maintaining their position on the head throughout the turn.

Fill in the Gaps Last

Once I had the existing sprites all turning from side to side my character had a bald patch between her front hair and back hair.

Mid Hair Sprite that I created
after I'd finished positioning
all my existing sprites.
It was at this point I realized I'd need an additional sprite to fill that gap. So I created a mid hair sprite which did not need to be split into left and right sprites since it sits inside the mask of the face shape (essentially the side you can't see gets hidden by the mask).

I suspect it's probably easier to work this way. Rather than trying to anticipate all the sprites you'll need before you start. Just create what you know you'll need. Create the rest once you start putting your head together.

The Face


With a simple face design like mine you can pretty much get away with using existing sprites for every angle. All you need to do is distort them to match the perspective of the head.

If you have a character with a larger, protruding nose you will probably need to create new sprites for various angles.

If you're trying to save time you want to avoid creating new sprites for the eyes or the mouth for every angle. Remember, these features contain multiple sprites for all your character's expressions and lip syncing. Chances are if you need to create a new sprite for a particular angle, you're going to need to create a new sprite for all the mouth or eye sprites for the character to work convincingly.

I'm not saying you shouldn't do that, but again, if you're trying to save time, explore the transform and deform options as much as possible before committing to creating new eye or mouth sprites for specific angles.

Work on One Element and Angle at a Time and Preview a Lot


You probably wouldn't do this kind of movement too much
in an animation because it draws attention to the effect not being
true 3D, however having all these head positions is very useful.
I found the best way to approach things is to work on turning the face one way, gradually working to the extreme (i.e. as far as you want the face to turn). Then mirror that angle to the opposite side and preview.

If something isn't quite right, make an adjustment and mirror again. If anything on your head isn't symmetrical (on my character the front hair isn't symmetrical), fix it once everything else is working as it should.

I also recommend starting with the nose or the mouth. If you can get those moving from side to side naturally it's easier to place the eyes and eyebrows in relation to them.

 ---o ---o--- o---

I think that's all the highlights from my first attempt at a more complex G3 360 head character. My end results definitely have room for improvement but I'm still quite happy with what I achieved.

Creating this style of head for your characters certainly gives them added flexibility with what you can do with them. Watch my demonstration video below titled 'Rise' to see how I managed to get multiple angles of my character despite it being a single angle character. The 360 head definitely helped.



In my next post I'll be looking at the behind the scenes making of the above animation.

Comments

  1. Hi..... I'm new to animation. In fact I'm only a month plus into animation. I got ca4 just last month and I have been playing with it every step of the way. I have created a morph based head using a real photo. I'm wondering if it's possible to create 360 heads with real pictures, as in a real face. Thanks

    ReplyDelete
    Replies
    1. I can't say I've tried it but it's likely possible. You would still have to separate all the key features into individual sprites because 360 heads can't be created using any of the eye and mouth techniques available to morph based heads.

      The other issue you might face is blending the photographic nature of the sprites. 360 heads are easier to create with sprites of flat color because it makes it easier to hide the joins and movement of the sprites.

      Interesting question though. I'm thinking I might give this a try just to satisfy my own curiosity. Thanks for asking. Good luck with your animation. I hope you are enjoying the learning process.

      Delete

Post a Comment

This blog is monitored by a real human. Generic or unrelated spam comments with links to sites of dubious relativity may be DELETED.

I welcome, read, and respond to genuine comments relating to each post. If your comment isn't that save me some time by not posting it.

Popular posts from this blog

Inochi2D - Free Open Source 2D VTuber Avatar Rigging and Puppeteering Software (Part 1)

Inochi2D Creator - Free Open Source VTuber Software. If you've been looking for a way to live perform as a 2D cartoon avatar on camera, whether it be for a live stream or for pre-recorded content like educational videos, then VTuber software is a low cost (or even no cost) option worth looking into. In my previous post, How to Become a VTuber - 2D and 3D Software for Creating and Controlling Your Avatar , I took a brief look at the relatively new but completely free and open source Inochi2D  which I thought showed great potential for my own needs of creating a live performance character rig for my own TET Avatar that I use for all my promotional materials. While it is possible to live perform my character using Cartoon Animator itself, Reallusion's MotionLive2D capture system isn't great - with lip sync in particular. More importantly though, I can't exactly teach people how to use Cartoon Animator if I'm using Cartoon Animator to control my Avatar. What is Inochi2D

Moho 14 Released - Still the Best 2D Animation Software for Indy Animators on a Budget

Moho 14 Released. Regular readers know I am a Reallusion, Cartoon Animator advocate through and through. Hands down I would recommend Cartoon Animator 5 first over Lost Marble's Moho 14 to anyone who is just starting in 2D animation, is a team of one, or just needs to animate as quickly as possible. However, feature for feature, Moho is, arguably, the best 2D animation software for the rest of us who can't justify a Toon Boom Harmony , or Adobe Creative Cloud subscription (and even with their applications Moho is very competitive on features). You can get started with Moho Debut for just USD$59.99 which is a cut down version of Moho Pro but it still has the most essential features needed for 2D animation. While Moho Pro is a whopping USD$399.99 (Cartoon Animator, which only has one version, is just USD$149.00) upgrades to new version numbers come down to a quarter of the price at USD$99.00. Even though Reallusion just released features like Motion Pilot Puppet Animation and

The Ultimate Independent Animator's App and Resource List 2019-2023 - Animation and Video Life

Image created with Cartoon Animator 4. Being an independent animator is not like a studio animation job. There's so much more to do that is indirectly related to the actual task of animating. Over the years I've sought out many apps, tools, and services that can help me achieve that one single task, expressing myself through animation. Below is my Ultimate Independent Animator's Resource List for 2019-2022. It started out as a list of free or low cost apps that could help you in every stage of producing either 2D or 3D animation, and then just kind of grew from there. You may not have been looking for a Time Management App as much as you needed something to get you started in 3D animation but when those commissioned projects start coming in you'll have a head start on maximizing your time. All the apps and services on this list had to meet two main criteria: They had to be useful and relevant to an Indy Animator/artist. The base app/service had to be US$

2D Animation Side Hustle - How to Package, Upload, Optimize, Price, and Promote Your Content in the Reallusion 2D Marketplace

T his is the final post in my four part, 2D Animation Side Hustle series on Selling in the Reallusion 2D Marketplace. I'll look at how to package up your content and upload it to the Marketplace, how to optimize your listings, price, and how to sell through your store backend as well as off site through social media and other channels. If you haven't read previous articles in the series click these links for Part 1 - Can You Make Real Money , Part 2 - Finding Niches , and Part 3 - What to Sell . Before getting started you'll need to register as a Content Developer in order to see the backend of your store on the Reallusion Marketplace . Packaging Content and Uploading to the Marketplace Since the release of Cartoon Animator 5 the software has a built in Package Manager that makes it easy to assemble and upload your Content to the Marketplace. Reallusion has a comprehensive, official video (embeded below) that quickly explains the entire process in less than seven minutes. 

Wonder Unit Storyboarder - Free Storyboarding Software for People Who Can (or Can't) Draw

Wonder Unit Storyboarder.  As an independent and solo animator I'm always tempted to try and skip storyboarding my animated shorts because they're usually only single scene sketch comedy type jokes. As a result I have many unfinished projects that kind of petered out due to having no clear finishing line. Storyboarding your productions, no matter how small, gives you a step by step guide of every shot that needs to be completed (no planning shots as you animate). It also allows you to create an animatic that gives you a rough preview of the finished production. In short, you shouldn't skip storyboards as they, generally, increase the chance of the project being completed. Disclaimer - I'm Not a Fan of Storyboarder Upfront, Wonder Unit's Storyboarder  is not my preferred storyboarding software. However it's completely free, has a number of very compelling featu

2D Animation Side Hustle - Deciding What to Sell in the Reallusion 2D Marketplace, Your USP, and Keeping Customers Coming Back

I n part three of my 2D Animation Side Hustle series on selling in the Reallusion 2D Marketplace I look at deciding what to sell, your unique selling proposition (USP), and look at a key strategy to keep people coming back to your store. If you missed part one on  Starting Your Side Hustle  and whether you can earn real money, or part two on  Niches and how to find ones in demand , I highly recommend you read them for a more complete picture of selling in the Reallusion 2D Marketplace. Deciding What To Sell The Reallusion 2D Marketplace is divided into four broad categories; Actors, Scenes, Motions, and Special FX. Each of these are also divided into further sub categories. Interestingly in the Marketplace Menu it lists how many items are available for each category, making it easy to see which may be under served and could present an opportunity. Reallusion 2D Marketplace Category Menu shows how many items are available in each category and could be a clue to what is being under serv

Prome AI Sketch Render Tool - Your Tradigital Clean Up and Colorist Artist for Character and Background Design

Random character head, Biro sketches drawn by TET (left). Render by PromeAI (right) using Prome's Sketch Render tool set to 'Comon:Cartoon, Render Mode: Outline'. W hile I don't do New Year Resolutions, one of my plans for the year ahead is to do more of my own art. Specifically character design drawn in an actual, physical sketchbook.  To that end, I have been spending the last half hour of most days drawing a page or two of random biro sketches in my sketchbook and posting the pages to my Instagram account  (this link will take you to one of my posts). These sketches are mostly practicing my skills because I don't really draw regularly anymore. Here is a tip, if you do this kind of sketching, and push yourself to keep doing it, you will see many drawings that could be taken further, even if you don't have anything they're suited for just at the moment. Which is where my second favorite AI Image Tool (after Leonardo.ai )  PromeAI comes into play. PromeAI