Skip to main content

Using CrazyTalk 8 and iClone 6 to bring Cartoon Characters to Life

The Comedians - by TET. 
Over 20 years ago I had the idea to create a comic strip that was based on the stand-up comedy of three fictional comedians. It was one of those bursts of inspiration that never got any further than headshot drawings of the aforementioned cast before being filed away.

One of the reasons I bought the latest version of Reallusion's CrazyTalk 8 is that the promotional videos showed it being used to create 3D, talking head versions of cartoon characters. Something I thought might be an easy way to put my own characters into animation.


I was reminded of that recently so I thought it was time to give it a try. Remembering my comedian characters I thought, that's the ideal place to start with talking head characters.

Hat-wearing Comedian.
Of the three character designs, the one I liked the most was the hat-wearing comedian. I knew I'd purchased just the right hat in one of the content packs for CrazyTalk 8 so I felt a good character likeness was possible.

CrazyTalk 8 (Pipeline)


I've already done a kind of step by step process for creating 3D talking heads in my review of CrazyTalk 8 (Pipeline) so I won't be going through that here. Instead, I'll mention just a few points worthy of note in bringing my characters into CrazyTalk 8.

When creating 3D characters from drawings or other artworks having a side angle is optional. Although I had a side angle drawn I decided to see how things would go if I just imported the front view into CT8. Since I didn't need the character to have a hat for face fitting I erased the lines and gave him a bald head.

Importing a front view into CT8 for face fitting.

Importing a single face image causes CT8 to reproduce the face texture on the back of the head, presumably as a way of continuing the hair texture. CT8 won't let you turn a character head past a three-quarter view either way so there's no chance of seeing a face on the back.

Despite this I saved out the face texture, erased the back face and erased the drawn ears as these would be replaced with actual 3D ears.

My intention is not to create a realistic looking version of the character. As much as possible I'm trying to make it look like a black and white cartoon style animation. Once I'd created the initial 3D head I dressed it with the right hat and matching suit (but not the striped tie), changing all the texture colors to grey scales as I went.

I swapped out the drawn eyes for CT8's comic style eyes and added comic style teeth and tongue inside the mouth.

To finish the scene I added the Comic Style Atmosphere (which lights the character directly from the front for a flatter look) and added a blurred graffiti background. You can see the results below with the original drawn image inset.

The finished character in CT8. Original drawing inset.

Character Creator & iClone 6


Once I saw the final character I thought about how the animation would be. I could simply write a funny script for him and animate it in CT8. There's enough ability to move the camera around to make the visuals more interesting than one continuous shot but a stand-up comedian needs an audience. There's no real way to show that in CT8 other than to suggest it with canned laughter.

Since CT8 (pipeline version) allows you to export heads to iClone (via the Reallusion Character Creator) I thought, why not make a full body version of the character, create a scene around him of a stage with an actual audience and then use video editing software to cut in some wide shots and audience reactions? Seemed like a good idea.

Unfortunately importing a 3D head into Character Creator is just that. Importing the head only. See the image below for what that looks like.

Naked as a Ken Doll in Character Creator.
The results of importing a head from CT8.

I spent a lot of time redressing the character in the CC. Fortunately, the same content packs in CT8 also installed in both the CC and iClone 6 libraries. Although I had to settle for a collar accessory (kind of like those that male waiters wear at a strip club - collar with no actual shirt) because the tie would not sit right on any shirt in the library (with all the controls to adjust it disabled). It didn't really matter a lot as you're only going to see this model from a distance.

Here's the finished result (image below) after much adjusting of textures to make sure everything was in the same greyscale style from CT8.

The finished Comedian in Character Creator.

Once you've finished creating your character in the CC it's a one step process to transfer it to iClone and then save it to your custom Avatars folder. The image below shows the character in iClone holding a pose from an animated sequence of him checking out his clothes in a mirror (just one of the many predefined motions you can apply).

The iClone version of the Comedian Character.

I haven't yet created an actual set for his wide shots but I have looked at some of the content I've purchased and found a very cosy, premade bar room that I can repurpose as a small comedy club with a bit of work and set decoration.

Hopefully, I can bring you the finished results in a future post.

Comments

  1. This is brilliant! Massively inspirational - thanks David. Is it possible to do just a half-body in Crazytalk8 with original material or do you have to go to iClone? Have already touched on this in the other comment a few mins ago but wasn't sure it was v clear what I meant.

    ReplyDelete
    Replies
    1. I mentioned in my reply to your other comment that CrazyTalk 8 will only let you add a neck and shoulders to your head. If you want more body then you'll need to purchase Character Creator and iClone6. I don't think you can take a CT8 head straight into iClone, gotta take it in through Character Creator.

      Once you have the character fully set up in iClone you can pretty much animate it from any view you like.

      Delete
    2. Thank you for this which I've only seen now. I can't even add the neck and shoulders to my head in CT8, not sure where those instructions are. But have asked on the Reallusion forums so no worries!

      Fortunately they're currently throwing CC in with iClone Pro so am sorted now. Phew!

      Delete
    3. I saw your question on the Reallusion forum and that clarified the issue. You can't add a 3D head and shoulders to a 2D head. The head and shoulders on a 2D head must be part of the original image (don't crop the body out of your original image) or you can add it behind the head as part of the background image (though if you make it part of the background it won't move with the character).

      Delete
  2. Worry not to reply - iClone is necessary apparently. :(

    ReplyDelete

Post a Comment

I welcome, read, and respond to genuine comments relating to each post. If your comment isn't that save me some time by not posting it.

Popular posts from this blog

Create 2D Animated Characters with 3D Character Creator Tools and Artistic Filters

3D CC3 TET Character, based on my Oppa Doll Avatar, used as the base for a 2D CA4 character. One of my favorite things to do is to create characters with any type of Avatar/Character creator app. In fact the first test I usually try with these tools is, can I make an avatar of me (or at least my The Extraordinary Tourist persona). Previously I've used 2D character creators like Oppa Doll as a source of artwork for some characters I've made for Reallusion's Cartoon Animator 4 animation studio but 2D character creators are limited to... well 2D. 3D Character Creators While you may think 3D character creators have no place in creating characters for 2D animation there are quite a number of advantages including: No drawing skills required. Render characters in any style. Use an art filter or even hand trace into line art. Need to animate the character in a specific pose or angle? Render out an image of the character in the required angle and animate it in 2D. Quicker to crea

Make Disney/Pixar Style Characters with Reallusion's Character Creator and Toon Figure Bases

The Extraordinary Tourist Classic Coat outfit created using Reallusion's Toon Designer for CC3. I've talked before how I've wanted to get into 3D Disney/Pixar style character animation since I first saw the animated cutscenes for the very first Tomb Raider game back in 1996. It's why I initially bought Reallusion's iClone 3D studio app as soon as I could afford a computer that would run it. But then Reallusion released their 3D Character Creator (CC) for iClone and I wanted to create my characters with that (and I did try with Bat Storm ). But the focus of CC was realism, even with ToKoMotion's stylised body morphs . Now with Reallusion's Cartoon Designer bundle for CC3 which features two packs, Toon Figures , and Toon Hair , designing Disney/Pixar style 3D characters just got a whole lot quicker. The two packs are the bare essentials for creating Toon style characters. Five body morphs (2 male, 2 female, and one adolescent body morph that w

Learn Moho Pro 12 Free Using SmithMicro's Own 104 Video Tutorials Sorted into a Logical Order of Progression

So you've bought Smith Micro's Moho Pro 12 along with the Moho, 10 hour, 104 Video Tutorials Add On pack so you can get learning right away... only you can't. For whatever reason, the video tutorials aren't sorted into any logical order of progression making them hard to follow. Yeah, I've been there, only I've done what Smith Micro should have done and sorted all the video tutorials into a logical order of natural progression for you. That is, each tutorial builds upon what you learned in previous videos and you won't suddenly come up against some feature you've never used before, unless that feature is what the video tutorial is about.

Three Image Overlay Apps. Do More with Your Reference Images While You Work

PureRef's image overlay in action with Cartoon Animator 4. One thing Cartoon Animator 4 still does not have in stage mode is the ability to onion skin previous and next frames.  For those complete animation newbies among you, onion skinning is the ability to see through the current frame to your previous and/or next keyframes so you can see the progression of your character or object's movement as you create and adjust each keyframe. Usually the previous and next frames appear lighter so your current frame remains the key focus. This prompted me to look for a tool that could overlay an image over my work to use as a reference while still allowing me to work on the app underneath the overlay. I had seen, and even used such apps in the past but it had been some time so I decided to see what was out there, preferably free and/or open source, with versions for Mac and Windows. Overlay 2 There are actually a number of apps that do nothing more than overlay an image but the only one

Artbreeder - Using AI created Character and Background Content in your Animations

A selection of User/AI generated images from Artbreeder. If you're looking for an endless supply of 2D character and background images for your animations then Artbreeder , an online Artificial Intelligence (AI) that generates image mash-ups you can tweak as much as you like, could be the ultimate content library. What is Artbreeder? Artbreeder is free to use though there are various paid plans, that give you additional features, such as higher resolution download images or more settings to play with. All images created on the site are Public Domain (CC0 License) and can be used in commercial projects. Using Artbreeder's online app you can generate head shot portraits, full body characters, landscapes, and other scenes simply by choosing two or more existing images to mash together then, using a series of sliders, to select which traits from each image you wish to lean toward in the final image. Photo Comparison - Top is my original uploaded photo. Bottom is Artbreeder's ap

Stylish Stick Figures for Cartoon Animator 4.2 - New Characters by TET

Stylish Stick Figures by TET. Animating stick figures is almost a right of passage for any animator who has ever made an old fashioned flipbook or discovered the free stickman animator app, Pivot Animator . There's also the hugely popular viral stick figure animation, Animator Versus Animation  and its sequels by Alan Becker that continue to inspire variations more than 12 years later. Back when Vyond was GoAnimate they had a stick figure theme that was popular site wide despite having many other themes with much more refined Saturday morning cartoon style characters. I even had my own stick figure series, Harry Chalk , on GoAnimate. Long story short, I was looking through the Reallusion Cartoon Animator Marketplace and discovered there really weren't any well designed, traditional looking stick figure characters. That's not to say there weren't any at all but I wanted something similar to GoAnimate's stick figures which included full facial features and male and

Screenlight - Prerelease Feedback for Your Animations and Videos Before Public Release

One way to give your animated productions the best chance of success is to prescreen them with a test audience before you release them publicly online or send them off to a festival etc. Big, Hollywood studios do this all the time so they can make changes that will hopefully give their movies a better chance for success, so why shouldn't you? While it may not be practical to gather an audience together, and have them sign a bunch of non disclosure agreements, for your 2-3 minute animated production, Screenlight is a free (with paid options for additional features), convenient, online app, that's a great alternative. Screenlight is actually intended to be a group productivity tool for gaining client feedback on every step of a video production but the 'free forever,'  single user, one project,basic account, is an ideal feedback tool for small, independent productions and hobby animators. Simply upload your video(s) (up to 1 Gigabyte) to your Screenlight Project, share t