Skip to main content

Creating a Complex G3, 360 Character Head in Cartoon Animator 4 - Tips and Recommendations

Desert Scavenger G3, 360 Head.
Creating G3, 360 character heads in Reallusion's Cartoon Animator 4 is something of a daunting task if you are working with a more detailed character head design. Your first attempt is bound to be a lot of trial and error. Mine certainly was and, in this article, I'm going to share with you what I learned.

That said, this is not a tutorial. It's a run down of my experience creating a head for my own character. I've linked to Reallusion's video tutorials below.

I chose to use a redesigned version of my G3 Desert Scavenger, Rey, Star Wars, parody character. Since the biggest part of her redesign was a completely new look head I thought now was a good time to try a more complex 360 head than my previous Color Monkey heads.

The process of setting up a 360 head is not hard but there is a lot to take in. To prepare myself I went through Reallusions first eight video tutorials which cover almost every aspect of the 360 head creator (which you'll find in the character composer).

The easiest way to access these tutorials is through the Cartoon Animator's tutorials page on the Reallusion website. Just open the 360 Head Creation section. There are actually four additional videos you can watch (for CA4 Pipeline Users) but the first eight will give you more than enough information to create your first 360 heads.

All my  tips and suggestions are based on creating a human character so may not be relevant to non human characters in part.

Getting Started


The easiest starting point is to create your character's head as a standard, front facing G3 character head - even if your character body is a 'side' or 315 degree angle character. Once your head is complete you'll be able to turn it to match whatever body angle you're using.

If you watch the tutorials you'll see it is possible to create a head that can turn a full 360 degrees however, unless you really need that, limiting your head to a 180 degree (left to right) turn is less work and will give you a good range of movement. You can always extend it to a full 360 degree turn later (or use other tricks to suggest a back view for those moments when you need one).

Top Left - how my head sprites appear when assembled
in Photoshop. Everything else, sprites that I had to create
or modify for the face, hair, and hip/upper body
with extended neck.
A key point to designing your head is to use flat colors rather than gradients. Particularly make sure each color is on its own layer in your graphic editor. For example, on my character you can see there is a light and dark shadow on each side of her face. These shadow elements are each on their own layer and, I didn't actually add them to my head until after I got the eyes, nose, and mouth moving how I wanted on the face.

If you have any elements that may not be seen once the head is turned left or right consider making it a separate sprite. For example my characters front hair on the standard G3 version is all one sprite. On the 360 version I split the sprite into left and right sides.

Another thing you may want to do is give your character a longer neck on the hip/upper body sprite. I found mine was initially too short causing my 360 head to look like it was floating on my side views.


360 Heads are as Complex as You Make Them


Here you can see my character has 11 set
viewpoints. All created by deforming the
front facing sprites. Above shows how I
deformed the front facing face shape to
achieve a side facing face shape.
360 heads can have as many as 25 individual angles each with full sprite replacement so you can get each angle looking exactly how you want. Fortunately it is completely optional to create sprites for all 25 angles, and even optional use all 25 angles.

My character only has actual sprites for one forward facing angle. Every other angle is achieved by transforming, deforming, masking, and moving my initial forward facing sprites. For the most part I feel my character's head looks pretty good at each of the eleven angles I created for her. Cartoon Animator does the rest in terms of managing the transformation between set poses.

I would recommend this approach. Try to create as much of your head turn as you can with your forward facing sprites. Only add in a new sprite if you're not able to achieve the results you want (or you just want the highest quality face turn achievable).

Work on getting the elements you have moving with the head as it turns so that they look like they are maintaining their position on the head throughout the turn.

Fill in the Gaps Last

Once I had the existing sprites all turning from side to side my character had a bald patch between her front hair and back hair.

Mid Hair Sprite that I created
after I'd finished positioning
all my existing sprites.
It was at this point I realized I'd need an additional sprite to fill that gap. So I created a mid hair sprite which did not need to be split into left and right sprites since it sits inside the mask of the face shape (essentially the side you can't see gets hidden by the mask).

I suspect it's probably easier to work this way. Rather than trying to anticipate all the sprites you'll need before you start. Just create what you know you'll need. Create the rest once you start putting your head together.

The Face


With a simple face design like mine you can pretty much get away with using existing sprites for every angle. All you need to do is distort them to match the perspective of the head.

If you have a character with a larger, protruding nose you will probably need to create new sprites for various angles.

If you're trying to save time you want to avoid creating new sprites for the eyes or the mouth for every angle. Remember, these features contain multiple sprites for all your character's expressions and lip syncing. Chances are if you need to create a new sprite for a particular angle, you're going to need to create a new sprite for all the mouth or eye sprites for the character to work convincingly.

I'm not saying you shouldn't do that, but again, if you're trying to save time, explore the transform and deform options as much as possible before committing to creating new eye or mouth sprites for specific angles.

Work on One Element and Angle at a Time and Preview a Lot


You probably wouldn't do this kind of movement too much
in an animation because it draws attention to the effect not being
true 3D, however having all these head positions is very useful.
I found the best way to approach things is to work on turning the face one way, gradually working to the extreme (i.e. as far as you want the face to turn). Then mirror that angle to the opposite side and preview.

If something isn't quite right, make an adjustment and mirror again. If anything on your head isn't symmetrical (on my character the front hair isn't symmetrical), fix it once everything else is working as it should.

I also recommend starting with the nose or the mouth. If you can get those moving from side to side naturally it's easier to place the eyes and eyebrows in relation to them.

 ---o ---o--- o---

I think that's all the highlights from my first attempt at a more complex G3 360 head character. My end results definitely have room for improvement but I'm still quite happy with what I achieved.

Creating this style of head for your characters certainly gives them added flexibility with what you can do with them. Watch my demonstration video below titled 'Rise' to see how I managed to get multiple angles of my character despite it being a single angle character. The 360 head definitely helped.



In my next post I'll be looking at the behind the scenes making of the above animation.

Comments

  1. Hi..... I'm new to animation. In fact I'm only a month plus into animation. I got ca4 just last month and I have been playing with it every step of the way. I have created a morph based head using a real photo. I'm wondering if it's possible to create 360 heads with real pictures, as in a real face. Thanks

    ReplyDelete
    Replies
    1. I can't say I've tried it but it's likely possible. You would still have to separate all the key features into individual sprites because 360 heads can't be created using any of the eye and mouth techniques available to morph based heads.

      The other issue you might face is blending the photographic nature of the sprites. 360 heads are easier to create with sprites of flat color because it makes it easier to hide the joins and movement of the sprites.

      Interesting question though. I'm thinking I might give this a try just to satisfy my own curiosity. Thanks for asking. Good luck with your animation. I hope you are enjoying the learning process.

      Delete

Post a Comment

I welcome, read, and respond to genuine comments relating to each post. If your comment isn't that save me some time by not posting it.

Popular posts from this blog

Featured Animator: Christian Haynes - 'Zack In Time' An Original, Independent, Animated Series on the Rise

Christian Haynes - Zack In Time.  If you've ever wanted to create an animated TV series staring your own original characters and stories then Los Angeles based writer, director, and animator, Christian Haynes is taking those next steps of putting together a team, developing a pitch/trailer for their series, Zack In Time. Featuring professional studio quality animation, they hope the show will get picked up by an animation studio for an official series. The path he and his team are taking is one you could easily follow as they deal with real life commitments, and building a following on Instagram and Tik-Tok showcasing their work behind the scenes. TET: Tell me a little about yourself. Who you are, and why you started animating? My name is Christian Haynes and I've loved animation ever since I was a kid. I would constantly be drawing cartoon characters from TV shows and movies and making my own little homemade comic strips.  As I got older, I became a lot more interested in st

Make Disney/Pixar Style Characters with Reallusion's Character Creator and Toon Figure Bases

The Extraordinary Tourist Classic Coat outfit created using Reallusion's Toon Designer for CC3. I've talked before how I've wanted to get into 3D Disney/Pixar style character animation since I first saw the animated cutscenes for the very first Tomb Raider game back in 1996. It's why I initially bought Reallusion's iClone 3D studio app as soon as I could afford a computer that would run it. But then Reallusion released their 3D Character Creator (CC) for iClone and I wanted to create my characters with that (and I did try with Bat Storm ). But the focus of CC was realism, even with ToKoMotion's stylised body morphs . Now with Reallusion's Cartoon Designer bundle for CC3 which features two packs, Toon Figures , and Toon Hair , designing Disney/Pixar style 3D characters just got a whole lot quicker. The two packs are the bare essentials for creating Toon style characters. Five body morphs (2 male, 2 female, and one adolescent body morph that w

Create 2D Animated Characters with 3D Character Creator Tools and Artistic Filters

3D CC3 TET Character, based on my Oppa Doll Avatar, used as the base for a 2D CA4 character. One of my favorite things to do is to create characters with any type of Avatar/Character creator app. In fact the first test I usually try with these tools is, can I make an avatar of me (or at least my The Extraordinary Tourist persona). Previously I've used 2D character creators like Oppa Doll as a source of artwork for some characters I've made for Reallusion's Cartoon Animator 4 animation studio but 2D character creators are limited to... well 2D. 3D Character Creators While you may think 3D character creators have no place in creating characters for 2D animation there are quite a number of advantages including: No drawing skills required. Render characters in any style. Use an art filter or even hand trace into line art. Need to animate the character in a specific pose or angle? Render out an image of the character in the required angle and animate it in 2D. Quicker to crea

Artbreeder - Using AI created Character and Background Content in your Animations

A selection of User/AI generated images from Artbreeder. If you're looking for an endless supply of 2D character and background images for your animations then Artbreeder , an online Artificial Intelligence (AI) that generates image mash-ups you can tweak as much as you like, could be the ultimate content library. What is Artbreeder? Artbreeder is free to use though there are various paid plans, that give you additional features, such as higher resolution download images or more settings to play with. All images created on the site are Public Domain (CC0 License) and can be used in commercial projects. Using Artbreeder's online app you can generate head shot portraits, full body characters, landscapes, and other scenes simply by choosing two or more existing images to mash together then, using a series of sliders, to select which traits from each image you wish to lean toward in the final image. Photo Comparison - Top is my original uploaded photo. Bottom is Artbreeder's ap

Creating a G3-360 Head From a Single Photo in Reallusion's Cartoon Animator

Source Photo from Generated Photos . Ever since Reallusion introduced the G3-360 Character Head into Cartoon Animator 4 I've wanted to see if their 360 Head Creator tool could be used to create an animated head using a photo. Part of the reason I've never given this a shot, until now, is that I just assumed it would be difficult, and require a lot of photo editing to blend out the sprite edges. It turns out, creating a photographic G3-360 head is not that much more difficult than creating a cartoon head, and can be done using a single photographic image using my own G3-360 head rigging system . While this article isn't intended to be a full tutorial, I'll run through the basic steps of how I achieved my photographic G3-360 head, shown in the comparison below, of a Cartoon Animator Morph-based head on the left, and my G3-360 head on the right. Pros and Cons Cartoon Animator's morph-based head system is ideal for animating photographic faces. It uses a semi 3D wire me

How to Create Caricature Faces From Photos Using Krita - Tutorial by TET

I was looking around online for an app that can 'cartoonify' a photo of a person, kind of hoping for a 'one click' solution. There are a few out there but none worth highlighting. Then I came across a video tutorial by Pixivu for Cartoonifying faces in Photoshop and wondered if I could do something similar in the free, open source drawing app, Krita ? While Krita isn't quite as elegant as Photoshop it does have some comparable features that make it very easy to create cartoon caricature faces from photos that you could use as illustrations or in your animations. They're particularly useful for using as Morph Based character heads in Cartoon Animator 4 (as shown below). Example Caricature Faces use as morph character heads in Cartoon Animator 4. While the actual steps to create heads like those shown above (and, yes, that character on the right is based on a photo of me that I snapped on my webcam) is not something you're just going to stumble across yourse

The Christmas Animation Rush - Five Apps to Create Your Last Minute Animated Holiday Messages

Merry Christmas from Animation and Video Life.  It's the most wonderful time of the year... well not yet. The Nightmare Before Christmas is not just the animated Tim Burton movie, it's also the nightmare of trying to make your own animated holiday messages in the week before Christmas. Animation takes time. Why didn't you start those in November?! If this sounds like your nightmare, here are five free or low(ish) cost apps to help you back to sharing the joy of the season with animation, so it truly will be the most wonderful time of the year. Cartoon Animator 4 (or iClone7 ) Reallusion Marketplace search 'Christmas'. If you're already a power user (or even know your way around it a little bit) you'll know CA4 is one of the fastest ways to make completely custom animations. The Reallusion Marketplace has a bunch of Christmas content you can utilize, just don't be too ambitious. Drop in a background, throw in a Santa character, record a short message f