Skip to main content

Blink - Paranoid GoAnimate Isometrix

GoAnimate's Product Manager, Nicolas, created a series of Isometrix custom characters and props which I wanted to try out but really didn't have anything in mind in terms of a story line.

Not to be deterred I decided to start putting together a scene with the available props in the hope that something would come to mind as I worked. The result was Blink which you can watch in the player below.

Blink by etourist

Like it? Create your own at GoAnimate.com. It's free and fun!

This animation is probably a classic example of an idea that just evolved as I worked to find inspiration.

As mentioned I started to piece together a background using the available Isometrix props. Nicolas had designed an orange picture frame for the theme which I decided to use on the wall of my background set. Trouble was I needed something to go inside it.

Trying to feature as much of the Isometrix theme as possible I decided to use some head props inside the two photo frames I'd placed each side of the flat screen TV. The head with the green hair was fine and motionless but I couldn't find a yellow haired head that wasn't animated.

I chose a yellow haired head with the least amount of animation and put it in the frame. Looking at it, that's when the idea for Blink hit me. The old classic - spying through the eyeballs of a picture on the wall.

From there it was just a case of having the guy sitting on the chair say the right things. The blinking photo is never explained. You only get the guy's assumptions - which come across as some what paranoid.

I only intended this animation to be short so having him sneak out the room seemed like a good ending point. Then I thought it might be even funnier if someone else came into the room, unaware of what the viewer has just seen.

The character that runs in is Happy Bunny. Chosen simply because I went into the GoAnimate Studio via the Happy Bunny theme. It gave a reason for the copyright, Jim Benton water mark that appears on the background.

Obviously Happy Bunny notices the picture blinking and I end it there hoping you'll get that the cycle will start again with Happy Bunnies own delusions about what the blinking picture means.

The whole thing is just a bit of fun and probably a one off. The Isometrix characters are really cool but it really needs the right idea to make them work well. Who knows? Maybe I'll think of something for them in the New Year.

Comments

  1. Really funny animation.

    Thanks a lot for using the isometrix characters. Glad you like them.

    ha ha... so in the end it's kind of a good thing I forgot to include a motionless head in that theme! It's funny how ideas are triggered!

    ReplyDelete

Post a Comment

This blog is monitored by a real human. Generic or unrelated spam comments with links to sites of dubious relativity may be DELETED.

I welcome, read, and respond to genuine comments relating to each post. If your comment isn't that save me some time by not posting it.

Popular posts from this blog

Eight 2D Animation Apps For Your Phone or Tablet Mobile Device

M obile productivity apps have become so capable that they can be great alternatives to their PC/MAC equivalents or serve as great tools in their own right when you're away from your desk. While some apps simply mimic their desktop counterparts, others offer well thought out, touch-friendly interfaces that are easier and more fun to use. Every so often I check out what's available for 2D animation for Android devices, since that's what I use, that can complement my workflow with Reallusion's Cartoon Animator 5. Some may be available for Apple devices as well. Below I've listed six free (F) apps (with optional paid (P) upgrades) on the Google Play Store that you might want to explore. Some are just fun apps on their own while others may be useful as part of your workflow on bigger animation projects. Not all are exclusively animation apps and could be used on any production. JotterPad (F/P) The name JotterPad makes this sound like a notepad application but it's ...

Skate Monkey (Part 1) - My first Crazy Talk Animator Multi-Dimensional Character

Continuing on with my progress of  learning Crazy Talk Animator 2 I've begun work on creating my first Multi-Dimensional character. As you may have guessed it's my Skate Monkey character that I briefly attempted to turn into a CTA1 character quite some time back (See this post for the video ). A CTA2 'Multi-Dimensional' character is simply a character that consists of 10 different view angles that form a 360 degree view. This character is attached to a bone skeleton that exists in three dimensional space. The software then calculates which images from your 10 different view angles are needed to execute whatever motion you add. In the image below you can see my skate monkey character drawn at angle zero in the Serif DrawPlus template provided by Reallusion. The other nine view angles are the CTA2 dummy character which I will progressively replace with my monkey as I draw more views. A CTA2 Multi-Dimensional character has 10 view angles. In the short video be...

Learning Moho Pro 12 (Anime Studio Pro) - Part 2, Debut Videos 1-15

Alvin Owl: Bones Rig. In part 2 of my journal blog documenting my progress with learning Moho Pro 12 I dive head first into the first batch of video tutorials covering the basics of Anime Studio Debut.... wait, what? In Part 1 I described how the video tutorials I purchased with Moho Pro 12 were in no particular order and made for a confusing mess. As well, most of the video tutorials are really for Anime Studio 11, which has all the same basic features minus whatever new features have been added.

Inochi2D - Free Open Source 2D VTuber Avatar Rigging and Puppeteering Software (Part 1)

Inochi2D Creator - Free Open Source VTuber Software. If you've been looking for a way to live perform as a 2D cartoon avatar on camera, whether it be for a live stream or for pre-recorded content like educational videos, then VTuber software is a low cost (or even no cost) option worth looking into. In my previous post, How to Become a VTuber - 2D and 3D Software for Creating and Controlling Your Avatar , I took a brief look at the relatively new but completely free and open source Inochi2D  which I thought showed great potential for my own needs of creating a live performance character rig for my own TET Avatar that I use for all my promotional materials. While it is possible to live perform my character using Cartoon Animator itself, Reallusion's MotionLive2D capture system isn't great - with lip sync in particular. More importantly though, I can't exactly teach people how to use Cartoon Animator if I'm using Cartoon Animator to control my Avatar. What is Inochi2D...

Plastic Animation Paper - Free 2D Animation Software

I discovered Plastic Animation Paper (PAP) Pro 4.0 for Windows quite some time ago and even had it installed on my computer for well over a year - unused. The full pro version of the software has been given away for free, no strings attached but with no tech support, since July of 2010. Not to be sneezed at since prior to that date this version sold for 695 Euro (roughly US$900.00). When I discovered it I was still finding my way back into my love for animation and the bug to animate my characters more traditionally via classical, hand drawn 2D animation techniques had yet to take hold. I didn't really understand what PAP did or why you couldn't make complete, finished animations with it. After finding some really great, very affordable, digital storyboarding software , PAP is the next tool in your digital production workflow for those of you on a budget creating traditional 2D animation. Depending upon how finished your storyboard panels are you could even impor...

The Ultimate Independent Animator's App and Resource List - Animation and Video Life

Image created with Cartoon Animator 4. Being an independent animator is not like a studio animation job. There's so much more to do that is indirectly related to the actual task of animating. Over the years I've sought out many apps, tools, and services that can help me achieve that one single task, expressing myself through animation. Below is my Ultimate Independent Animator's Resource List for 2024 (last updated Oct 2024). It started out as a list of free or low cost apps that could help you in every stage of producing either 2D or 3D animation, and then just kind of grew from there. You may not have been looking for a Time Management App as much as you needed something to get you started in 3D animation but when those commissioned projects start coming in you'll have a head start on maximizing your time. All the apps and services on this list had to meet two main criteria: They had to be useful and relevant to an Indy Animator/artist. The base app/se...

Featured GoAnimator: Enjoyinglifeinseoul (ELIS) - Witches of Misery!

EnjoyingLifeInSeoul GoAnimator enjoyinglifeinseoul is the December 2013 winner of my GoAnimate, Get Featured in TET's Blog contest . Enjoyinglifeinseoul has had his account with GoAnimate since March of 2011 and in that time has amassed 3346 followers and published 49 animations. This is his second win of the contest. Read his first winning post here . Enjoyinglifeinseoul chose to feature his animation , saying... Well, it took me some time to decide which of my animations to have featured. I considered some of my older ones like “Prince of Persia” or “Turtle Shell! Turtle Shell!” and the latest ones like “Demon Fire!” and “Witches of Misery!” In the end I went with “Witches of Misery” because most of the challenges and special techniques I had used in the others were covered the last time I was featured here.   Some fresh problems popped up this time and I thought that the solutions I came up with might help some of your readers. The other reason I choose this one...